Electronics for GP200

Now to make it RC! I used:

1 motor

2 servos

1 ESC

1 receiver

1 battery

inside the plane. I screwed the motor onto the firewall, but the screw was a little too long. So, I  used 2 firewalls stacked on top of each other to make the screw effectively shorter. I taped the esc to the inside of the plane. I plugged the servos and ESC into the receiver and bound it to my controller/transmitter. Everything looked fine. The last step is to close up the fuselage and get the propeller on. I hope everything goes well!